The following steps describe the process of taking a capture of a specific project, such as a tower or a floor, using the manual 360-photo capture mode.
Stepwise Description:
Capture Steps - 360 Image
The following steps describe the process of taking a capture of a specific project, such as a tower or a floor, using the manual 360-image capture mode.
Stepwise Description:
On the mobile app, once logged in, go to the project you would like to initiate capture. Click on "Download offline to capture"
click on ‘Capture’ on the project card
Select the level to be captured.
Select ‘360 Image’ as the Capture Type from the prompted options.
Choose the 360 Camera to connect. Ensure your camera is on
At this point, the app attempts to join the selected camera Wi-Fi to establish connection.
Click ‘Join’ to allow the app to connect with the camera through its Wi-Fi.
Once the camera is connected and there is SD card available in the camera, app shows a pop message stating 'SD card not found'
Mark your initial position and walk direction on the floor map, and initiate the recording.
To end the capture, simply tap on the ‘Stop Capture’ icon.
Also, you can see the level information from the capture screen ensuring the captures are associated to the right level.
Tap on ‘Save image’ option to save the capture.
Once the image is saved you can upload it from the upload screen, can press on the upload icon to initiate the data upload to the cloud.
We hope this article has been helpful. If you have any questions please reach out to [email protected]